CNC605


GDI/PIEZO Injector Cleaner & Tester


CNC605 launched by SmartSafe, is a Injector Cleaner and Tester suitable for GDI, EFI, SFI and other injectors. The injector can be cleaned and tested by simulating the engine condition. It can also be used to clean the fuel injector ad fuel supply system on the vehicle without disassembly. It is ideal for repair and maintenance service centers!

INC6025
cnc502 features

Functions

Functions

Description

Working mode selection

Can select GDI or EFI working mode based on the injector type.

Ultrasonic Cleaning

Capable of simultaneously ultrasonic cleaning multiple injectors, effectively removing carbon buildup.

Uniformity/Spray Testing

Detects the uniformity of fuel injection quantity for each injector and allows comprehensive observation of the injector spray pattern using background lighting.

Sealing Test

Tests the sealing and leakage of injectors under system pressure.

Fuel Injection Quantity Detection

Measures the fuel injection quantity of injectors under a constant 15-second injection condition.

Automatic Cleaning and Testing

Under specific working parameters, realistically simulates injector testing under various conditions

Reverse Flush

For the uniformity/spray testing item, performs a reverse flush using a reverse flush adapter to remove internal injector contaminants and residues attached to the filter screen.

Non-Dismantle Cleaning

Equipped with various non-dismantle cleaning adapters, allowing non-dismantle cleaning and maintenance for multiple vehicle models.
maintenance tips


Maintenance tips


Make Your Products Last Longer


  • Do not place anything on the control panel to prevent from breaking the measuring cup because it is made from vulnerable. Do not disconnect hose before the system pressure reaches "0".
  • Always ensure that the provided power supply is well contacted with ground safely.
  • The unit is designed with warning function. When the level switch checks the liquid inside the tank less than the lowest line, the unit will utter the warning sound and meanwhile stop the fuel pump and injectors automatically, and then the unit returns to the stop state. The unit will stop warning until the liquid is supplied enough. At this time pressing the ENTER key will run the unit again.
  • Clean the control panel in time and Keep the pulse signal cable away from the liquid.